Minscale is the perfect low cost scaling solution for professional applications. It runs with any HD ready or PC TFT device with analog or digital DVI/HDMI input.
Composite and S-Video input signals are converted to a single selectable output rate.

• Motion adaptive 3D Y/C separation comb filter (for composite video input).
• 3D(frame Based) motion adaptive YNR/CNR noise reduction(for Y/C video input).
• Advanced 3D motion adaptive deinterlace.
• Automatic 2:2/3:2 film mode detection.
• Supports 50Hz to 60Hz frame rate conversion.
• Built in 8-bit DAC for RGB or YPbPr output.
• Front panel and IR remote control.
• Automatic NTSC/PAL video format detection and switching.
• Infrared Control
• 125 x 30 x 123 mm, 400g

Following output rates are available:

Digital Out RGB and Analog Out RGB:

• 640 x 480 @ 60 Hz
• 800 x 600 @ 60 Hz
• 1024 x 768 @ 60 Hz
• 1280 x 768 @ 60 Hz
• 1280 x 1024 @ 60 Hz
• 1600x1200 @ 60 Hz
• 1920 x 1200 Q 60 Hz

Digital Out RGB and Analog Out YPrPb:

• 720 x 480p @ 50/60 Hz
• 1280 x 720p @ 50/60 Hz
• 720 x 576p @ 50/60 Hz
• 1920 x 1080i @ 50/60 Hz
• 1920 x 1080p @ 50/60 Hz

The unit can drive 2 displays using our DVI-Break Out cabel. One with analog VGA input and one with DVI/HDMI input.

shipping from stock

Manual 276 kb