The HDMIDOWNSCALE is the right
tool for homogenous HDMI installations where a composite or S-Video must be
derived from the HDMI signal. This downscaled video signals can be recorded
or used for distribution for older composite based installations.
The original HDMI signal is availabe at the HDMI output of the unit, so you
can put it anywhere in your system and do not interrupt the original
structure.
The HDMIDOWNSCALE does not have a dolby digital decoder so it should be
noticed that you can only get a analog stereo audio signal if you select 2
channel in the hdmi source setup.
However the SPDIF output at the box will either output 2 channel or 5.1
depending on the source setup.
The HDMIDOWNSCALE can either output PAL or NTSC coded video.
As a plus the box will also accept DVI signal and downconvert them to video
so you can record directly PC video.
The unit is NOT compatible with 1080@24p
signals.
As usual with HDMI it is necessary that the display supports HDCP if you
want to use HDCP encrypted source material.
- HDMI or DVI input incl. embedded audio
- optional feed of coxial audio when using DVI
- Composite and S-Video output
- Stereo Audio outputs
- HDMI output (HDCP)
- NTSC und PAL Videoausgang
- HDMI 1.2 kompatibel
- 141 x 127 x 38 mm, 510g, DC 5V 2,6 A
