SPATZ HDMICAT5 allows you to run a 1080p signal over 150m (450ft) CAT5e or 720/10080i over 200m (600ft) over CAT5e rated cables. This is the solution for the residential installer that is confronted with CAT5e wiring and wants to run HDMI through the house.
The SPATZ HDMICAT5 is using sophisticated technology to guarantee a working system under whatever circumstances.
You have an equlizer and gain adjustment to tune the signal after extensive cable runs at the receiver side. This allows installerfriendly finetuning while watching the picture !
The units are designed in a way they always work, no matter how bad your cable is. If you have problems with other CAT5 systems in your installation, like signal loss and sparkles we recommend to try ours - it will fix it.
Both units are powered by 5V wall mount adaptors and are included.

•  POWER DC 5V
•  Video In HDMI (HDCP)
•  Video Out HDMI (HDCP)
•  requires CAT5e, better CAT6 or CAT7
•  Supported Resolutions 480i/p/576i/p @300m/900ft
•  Internal EDID
•  1080i/720@200m/600ft
•  1080p@150m/450ft
•  supported Framerates 24-120 Hz
•  Dimensions 123 x 125 x 30 mm

Manual 26 kb

CAT5 WIRING GUIDE ! - CLICK HERE

EDID of HDMICAT5