FIRMWARE UPDATES for HDMFIX and DVIFIX:
What is NEW in Release 090526 ?
Firmware 090526 adds two new EDID settings in memory
53 and 54 with 1280 x 800 resolution.
54 is reduced blanking pls try which one delivers best results.
What is NEW in Release 090908 ?
Firmware 090908 allows future programming of a new line of
SPATZ EDID simulators that will work as SingleEDID units.
The procedure is
Connect the DVIFIX or HDMIFIX to a source to provide 5V to the output of the units. Then connect the new
EDID simulator to the output of the HDMIFIX or DVIFIX.
Connect the RS-232 cable to a computer and launch the Hyperterminal configuration file (link)
The command "p" and CR (carriage return) programms the current EDID into the new EDID simulator.
Command "r" and resolution number alternatively (+) or (-) for on screen selection.
Example: "r" CR "31" CR "p" CR programms resolution Nr. 31 into the memory of the new EDID simulators
What is NEW in Release 091221 ?
Small bug with Hyperterminal hanging up removed, when rebooting PC.