SPATZ DVIRGBPRO will revolutionize the way we transmit HDMI or DVI signals and will solve many integration problems in the professional AV industry.
The unit can transmit HDMI or DVI signal over standard RGBHV video multicore as it can be found in many AV installations all over the world.
The maximum transmission distance for this technology is determined by the quality of the multicore and the input video resolution. The system requires 5 wires if the receiver is remote powered or 4 wire if the optional RX power supply is used.
With 1080p Video or WUXA PC signals the system will typically work at 100m/330ft with lower res video up to 130m/400ft.
The SPATZ DVIRGB-PRO consists of a rack mountable 19 inch wide transmitter with 4 HDMI/DVI inputs and a compact receiver unit that is intended to be used at the display location.
The HDMI/DVI In/Outputs are DVI-I type connectors fully supporting HDMI 1.3 deep color at 2,25 GBits.
RGBHV multicores or bundled RG59 cabling are connected directly with the BNC connectors at the RX and TX unit.
This kind of HDMI/DVI transmission is the perfect answer for existing installations that have the cables burried in ceilings or floors that are difficult to replace for digital video signals.
This way there is no easier way to convert the exisitng installations to be fully compatible with HDMI or DVI signals.
If you intend to go on using analog signals along with HDMI/DVI video we recommend our analog to digital converters and scalers like the VGAHDMI, DIGISCALE or MULTISCALE.
In addition the DVIRGBPRO offers a complete EDID management that my be configured independentely for each of the 4 inputs.
In smaller installations these inputs may be used directly with wallplates or pockets for DVI sources guaranteeing that the connected PCs will boot with the desired output resolution that is matching the native resolution of the display device.
If you want to learn more about EDID  and SPATZ EDID managing products follow the links of  HDMIFIX and DVIFIX.
The DVIRGB-PRO is using the technology of 4 HDMIFIX to ensure maximum flexibilty for EDID management.
The unit can be operated using front buttons and 2-line 16 character LC-display, infrared remote or RS-232 control.

Technical data

• Possible distances up to 100m/330ft at full resolutions
• No latency !!!
• HDMI 1.3 compatible max. 2,25 GBit/s
• 4 x DVI connectors for stability
• Fully compatible with HDMI when used with adaptors
• DVI resolutions up to WUXGA or 2k x 1k
• transparent dataransport without any delay
• fully protected against overvoltage and wrong connections
• 4 or 5 wire operation (75 Ohm)
• Remote Powering of the receiver
• Integrated universal power supply 100V-254V
• Full metal housing for mobile usage
• shippping with 19 inch rack mount
• ideal for rental and staging with existing Multicore
• perfect replacement for fragile optical wires